, , ,

Loop powered beacon (σειρήνα) BENTEL FC430SAB

The FC430SAB is a FireClass Addressable Beacon that fits into the 5B Standard Base. Alternatively the FC430SAB may be fitted to the FC430SB, Sounder Base to enable the FireClass 500 Control Panel to communicate with and control this sounder bases and also provide a Flashing Beacon effectively turning the FC430SB into a combined addressable loop powered sounder and beacon.

76.38€
Προσθήκη στο καλάθι
, , ,

Βάση μπουτόν BENTEL FC420CPB

13.64€
Προσθήκη στο καλάθι
, , ,

Εξωτερικό μπουτόν αναγγελίας φωτιάς BENTEL FC421CP

FC421CP Addressable Break Glass Callpoint is designed to monitor and signal the condition of a switch contact that is operated by activating the break glass element. The FC421CP is fitted into a standard weatherproof break glass callpoint housing. The glass element may be replaced with the deformable plastic element 515.001.127 which allows the FC421CP device to be reset, using the key supplied, after alarm activation.

238.70€
Προσθήκη στο καλάθι
Εξαντλημένο
, , ,

Εξωτερικό μπουτόν αναγγελίας φωτιάς BENTEL FC410LPAVR

141.86€
Διαβάστε περισσότερα
, , ,

Φαροσειρήνα IP66 (εξωτερικού χώρου) BENTEL FC410LPAV

The FC410LPAV  is a red loop supplied addressable sounder /beacon suitable for outdoor  use  (IP65). It’s  low consumption and it’s equipped with an embedded isolator. It’s possible to select 16 tones, 2 volumes and 2 flashing frequencies via FireClass 500 Console software.

171.86€
Προσθήκη στο καλάθι
, , ,

Πλακέτα 1 εισόδου / 1 εξόδου BENTEL FC410SIO

The FC410SIO Single Input Output Module provides one volt-free relay changeover contact and one input to monitor external equipment. The input can be configured to monitor normally open or normally closed inputs.

114.58€
Προσθήκη στο καλάθι
, , ,

Mini πλακέτα εισόδου BENTEL FC410MIM

The FC410MIM Mini Addressable Contact Input Module is designed to monitor external equipments. The FC410MIM provides one input and can be configured to monitor normally open or normally closed inputs.

59.33€
Προσθήκη στο καλάθι
, , ,

Πλακέτα 3 εισόδων/ 4 εξόδων BENTEL FC410MIO

The FC410MIO Multi I/O Module has three inputs and four low power outputs. The inputs can monitor external equipments and can be configured to monitor normally open or normally closed inputs. All four low power outputs can drive a self-powered high voltage relay HVR800. By disabling the low voltage outputs three and four, the outputs one and two can be used as volt-free relay changeover contacts (2 A @ 24 Vdc).

163.68€
Προσθήκη στο καλάθι