PSTN τηλεφωνικό interface BENTEL FC500PSTN
FC500PSTN is a Telecom Module which allows implementing the functions of Channel Telephone Dialler and Telemonitoring (functions E and J of standard EN54-1:1996), on the FireClass 500 control panels.
Αναλογικός – addressable φωτοηλεκτρικός οπτικός ανιχνευτής καπνού BENTEL FC460P
Με οπτική γωνία 360ο μέσω 2 Leds, ενσωματωμένο test switch, δυνατότητα απομακρυσμένου ελέγχου. • Διαστάσεις : 109 Χ 43mm • Θερμοκρασία σε λειτουργία: -20ο έως +79ο C. • Θερμοκρασία αποθήκευσης: -40ο έως +80ο C. • Υγρασία: 95% . • Πιστοποίηση: ΕΝ54 pt 7.
Αναλογικός –addressable διπλός MULTI-SENSOR θερμικός + ορατού καπνού BENTEL FC460PH
Με οπτική γωνία 360ο μέσω 2 Leds, ενσωματωμένο test switch, δυνατότητα απομακρυσμένου ελέγχου. • Διαστάσεις : 109 Χ 43mm • Θερμοκρασία σε λειτουργία:-20ο έως+79οC. • Θερμοκρασία αποθήκευσης:-40οέως+80ο C. • Υγρασία: 95%. • Πιστοποίηση: ΕΝ54 pt 7 & ΕΝ54 pt 5 .
Αναλογικός – addressable θερμικός ανιχνευτής BENTEL FC460H
Σταθερής θερμοκρασίας, με οπτική γωνία 360ο μέσω 2 Leds, ενσωματωμένο test switch, δυνατότητα απομακρυσμένου ελέγχου (remote Led option). • Διαστάσεις: 109 Χ 43mm • Θερμοκρασία σε λειτουργία: -25ο έως +79ο C (-40ο έως +90ο για περιορισμένο χρόνο λειτουργίας) • Θερμοκρασία αποθήκευσης: -40ο έως +80ο C. • Πιστοποίηση: ΕΝ54 pt 5
Sounder base BENTEL FC430SB
The FC430SB Loop Power Sounder Base provides an additional sounder function on the FireClass 500 control panel. The FC430SB Loop Powered Sounder Base requires an associated FC400 series detectors, FC430SAB or FC430SAM module in order to operate, as it uses the address of the detector or the module that is fitted to it. The configuration FC430SB with detectors allows only to activate the sounder by his associated detector and could not be activated by zones. For this case you have to use the FC430SAM and FC430SAB. The FC430SB does not support the detector FC400P.
Απομόνωση (isolator) βάσης BENTEL FC450IB
With all the features of the 5B Universal Base the FC450IB Isolator Base allows any FC400 Series Detectors to be upgraded to incorporate bidirectional short circuit isolation. Implemented on every detector, the FC450IB can ensure that no detector is lost on a system in the event of an open or short circuit. Alternatively, the FC450IB can be implemented between detectors to provide short circuit isolation according to EN54. The FC450IB can be used as a stand alone line isolator fitted between call points and other ancillaries.




